No part of this web site may be reproduced or transmitted in any form, by any means, electronic or mechanical, including photocopying and recording, except that Entrust authorizes you to view, copy, download, and print Entrust documents (such as white papers, press releases, data sheets, and FAQs) that are available on this web site, subject to the following conditions:
The documents may be used solely for noncommercial, informational purposes.
The documents may not be modified.
Copyright, trademark, and other proprietary notices may not be removed.
Nothing contained on this web site should be construed as granting, by implication, estoppel, or otherwise, any license or right to use this web site or any documents displayed on this web site, through the use of framing or otherwise, except: (a) as expressly permitted by these terms and conditions; or (b) with the prior written permission of Entrust.
Prices unless otherwise stated are EXW shipping point and do not include the cost of a serviceman unless specifically quoted. Standard commercial packaging only is included and other type packaging must be requested and priced extra. Unless you provide Hydradyne LLC with a valid and correct tax exemption certificate applicable to your purchase of Product and the Product ship-to location, you are responsible for sales and other taxes associated with the order. Shipping and delivery dates are estimates only.
Unless otherwise stated shipping point is either Hydradyne LLC’s warehouse or that of component manufacturer’s plant and shall be EXW at that point, and delivery of goods to initial carrier shall constitute delivery to you, and shipment shall then be at your risk with claims for losses or damages in transit with the carrier to be made and prosecuted by you.
Terms of payment are at Hydradyne LLC’s sole discretion and unless otherwise agreed to by Hydradyne LLC, payment must be received by Hydradyne LLC prior to Hydradyne LLC's acceptance of an order. Your order is subject to cancellation at Hydradyne LLC’s, sole discretion. Hydradyne LLC is not responsible for pricing, typographical or other errors in any offer by Hydradyne LLC and reserves the right to cancel any orders arising from such errors. Payment must be made at the time of purchase with approved credit cards, or by wire transfer fee-paid for by customer, for domestic orders or an irrevocable letter of credit from a US Bank correspondent in advance for international orders. Purchaser agrees to pay all costs of collection or securing or attempting to collect or secure the debt created by this purchase, including reasonable attorney’s fees, whether or not involving litigation.
Delivery promises are made to the best of our earnest knowledge, and depend on promises made to us by our suppliers and theirs, and are therefore estimates. Where customer information or data is necessary to complete an order, delivery is from time complete information is on hand. We assume no responsibility for delays due to transportation, fires, strikes, floods, accidents and other causes beyond our control. We will not be liable for any damages whatsoever, whether direct, indirect, special or consequential resulting from missed delivery dates.
Claims on account of shortages or erroneous shipment must be made within 10 days after receipt of shipment. Prior payment does not prejudice a claim.
Goods may be returned only upon written authorization giving shipping instructions and identification procedure. Goods must be packaged properly to avoid damage in shipment. We reserve the right to charge for placing goods in saleable condition plus a restocking charge and for any transportation charges we might pay. Seller will willingly cooperate with customer without customer expense to rectify an acknowledged Seller or supplier error. On returns due to customer error Seller will take required action to minimize customer cost. Products and systems manufactured to customer’s specific specifications are not returnable.
Since OSHA requirements are so complex and since specific spot of use, personnel proximity, and inspector interpretation variation, govern requirements, we cannot issue blanket statement of compliance. Therefore, should a general request for OSHA compliance appear on order, we will accept the order only on basis such customer OSHA compliance request does not apply and that we must be advised in writing of specific OSHA requirements involved, at which time we will advise if they can be met. The installation and operation of products and systems purchased from Seller to be in a safe manner and in conformance with applicable codes and regulations is customer’s responsibility.
Individual components sold by Seller, or components used as parts of any products manufactured by Seller, shall carry no warranty other than that of the manufacturer of the component. Any other warranties as to the said components are specifically excluded by Seller. Products actually manufactured or repaired by Seller shall be warranted to be free from defects in material and workmanship for a period of six (6) months from date of shipment by Seller unless otherwise agreed in writing. Alteration, accident, neglect, improper application, improper maintenance or other misuse shall void any warranty of Seller or its suppliers. On products manufactured or repaired by Seller, our obligation under this warranty is limited to replacement or repair of parts determined by Seller to be defective and no charges will be accepted for removal or replacement of equipment or parts. We reserve the right to request return of goods to the point of manufacture, freight prepaid, to determine the cause of failure, and refusal to comply with such request within a reasonable time will void any applicable warranty. We shall not be liable to any person or company for incidental or consequential damages, injury, or commercial loss resulting from any breach of warranty and under no circumstances shall our liability exceed the contract price for the goods in question. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. It shall be the responsibility of the purchaser to obtain written warranties from the manufacturers of components and to make proper claim for warranty repairs with such manufacturers although Seller shall endeavor to provide copies of such written warranties upon request and assist making warranty claims with components manufacturers. No employee of Seller is authorized to warrant the suitability of system or products beyond the state of use or warranty by the manufacturer of component or system.
Net minimum billing shall be $49.00 unless there is a higher charge by the goods manufacturer. We will attempt to advise customer of any minimum billing charge so order can be increased to approximate charge.
As products we sell may be used by the user for uses beyond our control and the manufacturer of products sold exert their own patents policy, Seller shall not be held liable for any patent infringements, and actions concerning patent questions shall be handled by our manufacturer suppliers in accordance with their policies.
Unless otherwise stated, we reserve the right to partial ship and bill accordingly.
As many products we sell are tailor made to specific requirements and may have little commercial value or use to others, we cannot accept cancellations without our specific approval and customer’s agreement to accept charges for goods, time, labor, and expenses already earned by manufacturer at time of desired cancellation.
Seller can only furnish equipment to conform to the performance stated by the manufacturer of the component furnished, and cannot guarantee an end result of product, as Seller is entirely dependent on the customer to provide the data such as torques, speeds, pressures, and forces required for the specific application.
Acceptance of Terms, Conditions & Warranty
These terms and conditions constitute the complete agreement between buyer and Seller, any printed statements on customer’s order to be contrary notwithstanding. Any conditions other than these must be agreed to in writing to be applicable. The issuance of an order to Seller shall constitute acceptance by customer of these herein stated terms, conditions and warranty.